RESELLERHow to Connect to EC2 Instance using Putty Quickly

How to Connect to EC2 Instance using Putty Quickly

How to Connect to EC2 Instance using Putty Quickly

Connecting to an EC2 instance is needed many times when you need to perform any operations on your EC2 instance.

There are many ways to do it including from the browser itself using AWS EC2 Instance Connect Option. In this post, we’ll see how to connect to EC2 Instance using putty.

So are you ready?

Let’s get started…

Don’t want to miss any posts from us? join us on our Facebook group, and follow us on Facebook, Twitter, LinkedIn, and Instagram. You can also subscribe to our newsletter below to not miss any updates from us.

What is Putty?

PuTTY is free and open-source software that supports multiple network protocols such as SSH, Telnet, SCP, serial port and raw socket connection.

It is most commonly used to connect to remote servers using SSH, a secure protocol that encrypts all communication between the two machines.

Here are some of it’s usual use cases-

  1. To connect to remote servers and run commands
  2. To transfer files between the local and remote machines
  3. To configure and troubleshoot network devices
  4. To access serial devices, such as routers and switches
  5. To debug software
  6. To monitor system performance

Prerequisite

The prerequisite to connect to the EC2 instance using putty is nothing special. You just need to have an AWS account. Additionally, you need to have permission to create/connect to the AWS instance.

See How to Create a Free Tier AWS account in Right Way

Steps to Connect to EC2 Instance using Putty Quickly

  1. Launch an Amazon Linux EC2 Instance
  2. Download and Install PuTTy
  3. Convert .pem Keypair to .ppk format
  4. Connect to EC2 Instance using Putty

Step 1: Launch an Amazon Linux EC2 Instance

Before you connect to an EC2 instance, you need to have one up and running. If you don’t have one, use my previous tutorial to create an Amazon Linux Instance on AWS.

Make sure to save your keypair (.pem) file at a convenient location as you will need them while connecting to your instance.

Once you have an instance, grab the public IP/DNS as we’ll need it later. You can find it from the console as shown below-

How to Connect to EC2 Instance using Putty Quickly

InstanceIP = 13.232.217.17

Step 2: Download and Install PuTTy

We just grabbed the public IP of the instance we want to connect to. Next, you need to install PuTTy on your local system if you don’t already have it.

First, navigate to PuTTY downloads page and select an installer for your system. And install it.

Once installed, it looks like below-

Putty installation

Step 3: Convert .pem Keypair to .ppk format

PuTTY understands the .ppk file instead of the .pem file. Let’s convert our keypair which is currently in .pem format to .ppk.

Open Puttygen by typing Puttygen in the search bar.

Click on the Load button

Navigate to the folder where keypair is and set the filetype to *

Once you select .pem file, PuTTy imports it as shown below-

How to Connect to EC2 Instance using Putty Quickly 2

Click OK and then Click Save Private Key.

Step 4: Connect to EC2 Instance using Putty

Close the Puttygen application and open PuTTy.

Provide the ec2-user@PublicIp you saved earlier in the hostname field, click save-

How to Connect to EC2 Instance using Putty Quickly 3

Next, click on SSH from the left side menu, click on Auth-> Credentials and Click Browse on Private key file for Authentication.

Select the .ppk file we generated earlier. And Click Open.

How to Connect to EC2 Instance using Putty Quickly 4

You will see a prompt like the above to Accept the connection for the first time. Click on Accept and within no time, you should be connected to your EC2 instance like shown below-

How to Connect to EC2 Instance using Putty Quickly 4

Congratulations !!!

You have successfully connected to your EC2 Instance using Putty.

Conclusion

In this post, you learned how to Connect to EC2 Instance using Putty quickly. We started from scratch, launched an EC2 instance and connected to it via SSH using SSH client PuTTy.

I hope you were able to connect to your instance using PuTTy. Do let me know in the comment box.

Suggested Read:

How to Connect to AWS RDS from MySQL Workbench

Latest news

InMotion Hosting Unveil CC-4000 Dedicated Server Plan

InMotion Hosting is setting a new standard with the launch of its latest top-tier commercial-class plan, the CC-4000 Dedicated...

The Evolution of Hosting Control Panels

In this burgeoning digital era, websites serve as online storefronts for both businesses and individuals....

Challenges of Cloud & Ultima’s Solution to Transform Business

With the way that AWS and Microsoft dominate technology conversations, particularly now around AI and Gen-Ai, most business and...

Must read

Top 10 CIO Trends for 2019

As we get ready to close out 2018 and...

Are the cloud wars over or just getting started?

One of the biggest opportunities for enterprises large and...

You might also likeRELATED
Recommended to you